With the continuous development of cleaning industry, more and more industries and enterprises have applied ultrasonic cleaning machine. In the process of use, there will always be a variety of conditions, industrial ultrasonic cleaning machine trip is a very common fault.

導致超聲波清洗機跳閘的一個可能性原因可能是電路引起的短路，線路接錯或者線路老化都可能引起電路發生短路的現象。原因二可能是整流橋短路，超聲波清洗機發生整流橋短路也會引起使用過程中跳閘，好的解決辦法是換新的整流橋。后一個原因和清洗頻率的設定有關，如果清洗的物品過多同時設定的清洗頻率太高，也很容易產生跳閘現象。
                

One of the possible reasons for the trip of the ultrasonic cleaning machine may be the short circuit caused by the circuit. The wrong connection or aging of the circuit may cause the short circuit of the circuit. The second reason may be the short circuit of the rectifier bridge. The short circuit of the rectifier bridge of the ultrasonic cleaning machine will also cause the trip in the process of use. A good solution is to replace the rectifier bridge. The latter reason is related to the setting of cleaning frequency. If there are too many items to be cleaned and the setting of cleaning frequency is too high, it is easy to trip.

對于跳閘現象是時常性的故障，對此需要先找到原因，然后再根據原因得到解決辦法。

For the trip phenomenon is a frequent fault, we need to find the reason first, and then get the solution according to the reason.

以上是關于“工業超聲波清洗機設備跳閘的原因分析”的介紹，相信大家都有所了解了，如想了解更多精彩資訊請點擊我們的網站：http://www.xgsic.com。

The above is about the "industrial ultrasonic cleaning machine equipment trip reason analysis" introduction, I believe you all know, if you want to know more wonderful information, please click our website: http://www.xgsic.com 。